Malaysia Shop - Making lives Easier, Healthier, Happier.

ELTON Electric Boiler Water Heater 55 Liters

///ELTON Electric Boiler Water Heater 55 Liters

ELTON Electric Boiler Water Heater 55 Liters

RM 695.00

SKU: elton_55 Category:

Description

ELTON Electric Boiler Water Heater 55 Liters ( 12 Gallon )

index1. Stainless Steel Inner Tank:
Made of stainless steel of 1.2mm thickness (AISI 304 2 D) which by far is the most recognised material for it’s excellent anti-corrosive properties within atmosphere and water. It carries a five (5) years warranty against leakage due to manufacturer’s fault.

index22. Magnesium Anode Rod:
Made with magnesium alloy and when the anode is electrically connected to the structure to protect, it makes more negative the electrochemical potential than the structure itself. In this way the structure acts as the cathode and the magnesium alloy rod as the anode (therefore, the name magnesium anode). It is used to protect metallic structures that are in contact with water against corrosion.

index33. Heating Element
Made with copper sheathed immersion type that has an electrical rating between 1.5kW- 3.0kW

 

index44. Thermostat c/w electrical cut-off device :
To sense and to monitor the temperature of water in the inner tank between 40° C- 70° C approximately. Besides, it is equiped with a Bimetallic Thermal cut-off device, also called th third safety, which will be activated to cut off electricity supply should there be any malfunction of the thermostat.

index55. Safety Valve cum Non Return Valve :
It has dual functions, one is to guard against excessive pressure built-up in the inner tank above 7.58 bar (11Dpsi), the other is to prevent water from the inner tank to flow back.

index66. Wide Range of Capacities :
Both Elton and Ignis water heaters have a wide selection of standard capacities of between 3 gallons – 33 gallons to cater to individual requirements. We can also manufacture according to customers’ requirements (tailor-made) to meet specific needs and applications both for domestic and commercial purposes.

index77. Easy Installation:
Both Elton and Ignis water heaters, irrespective of capacities, can be easilly installated, whether wall-mounting or floor-mounting, vertical or horizontal version. Its unique design totally eliminates the need for vent pipes.

index88. Single I Multiple-Outlets:
Both Elton and Ignis water heaters are stored under pressure, the flow of hot water can be diverted to either single or multiple outlets or at different levels.

Note:

1. Electrical parts cany a one (1) year warranty against manufacture’ s defects.
2. All the above important component parts are fully imported.

Technical Specification

Electrical Loading 3.0kW, 12.5AMP AC 240V/50Hz
1.5kW, 6.3AMP AC 240V/50Hz
Electric Cable 3 Core VCTF
2.0mm2 X 3C X 105 C 300 / 500V (Compliance of SIRIM Requirement )
Min. Water Inlet Pressure 2.76 bar (40 psi)
Pipe Size (1) 15mm (1/2″) dia.Stainless Steel pipe for Stainless Steel inner tank.
(2) 15mm (1/2″) dia.Mild Steel Pipe for Mild  Steel inner tank.
Insulation Fiberglass wool, Thickness : 1″ Density :1lb / ft2
Water Temperature Themostatically controlled between 40c – 70c approximately. Max . present temperature at 70c
Thermal cut-off (Third safety) Below 99C – manually resetable
Safety Valve Pressure release at approximately 7.58bar (110 psi)
Tested Pressure 17.24bar (250 psi)
Inner Tank (1) Stainless steel AISI 304 2D of 1.2mm thickness.
(2) Cold Rolled steel JIS G3141 of 2.2mm thickness.
Outer Casing Cold rolled steel JIS G3141 of 0.7mm thickness coated with epoxy powder.

 

Capacity

Heat Up Time

Recommended For

Net Weight (KG)

Lt.

Gal.

Ambient
Temp.

 40°C

45°C

 50°C

55°C

Shower

Long
Bath

Jacuzzi

Stainless Steel

Empty

Full

55

12

26°C

18m

24m

31m

37m

YES

YES

NO

18

73

Reviews

There are no reviews yet.

Be the first to review “ELTON Electric Boiler Water Heater 55 Liters”

Your email address will not be published. Required fields are marked *